Tree Damage Roof Repairs in Sydney

Assessing structural damage before anything else

The first question after a tree hits is whether the roof structure is compromised. We check rafters, battens, purlins and trusses for cracks, splits and displacement, and we look at whether the impact has pushed walls or the ridge line out of alignment. If the frame is damaged, that must be repaired or replaced before new roofing goes on. Skipping this step is how a repaired-looking roof stays structurally unsafe.

We also assess the ceiling and internal linings, since a heavy strike often cracks plasterboard and can bring insulation and debris down into living spaces. Water that entered during the event may have soaked timber and insulation that needs drying or replacing to prevent rot and mould.

Safe removal and making the site secure

Getting the tree off the roof safely takes care, because the timber is often under load and can shift or roll unpredictably, and there may be live power lines or unstable branches nearby. We coordinate safe removal, then tarp and prop the opening so the home is weathertight and no one is at risk from falling material while the full repair is scoped.

For large trees we work alongside qualified arborists and, where the frame is affected, structural input, so the removal and the rebuild are handled by the right trades in the right order.

Rebuilding the roof structure and surface

Once the structure is sound we rebuild outward: new or sistered rafters and battens as needed, fresh sarking, then re-tiling or re-sheeting to match the existing roof. Flashings and capping around the repaired area are renewed so the new section ties cleanly into the old and is fully watertight. We finish with a proper inspection of the whole roof, since impact can loosen tiles and fixings well beyond the strike point.